Photo by CC user charliebrewer on Flickr
A blocked toilet will certainly be a major source of inconvenience for most homeowners, and repairs can often cost much more than most people would expect. If you have a working toilet that constantly runs or suffers from a leak, it can waste water, hike up water bills, and eventually lead to obnoxious messes or sounds. In Australia, many cases, common problems that afflict a broken toilet aren’t too difficult to repair, and require only a few basic tools and supplies.
Homework
What you will need to do is to familiarize yourself with how a toilet works, and check out the unit to see if some adjusting of the components will somehow help to fix the issue. You may find that, you will need some tools to get that broken toilet working again.
Handles and Chains
If you have a defective toilet handle, or one that no longer wants to flush normally, the problem can may be sorted by repairing the chain that links the handle to the flapper. If you fancy having a go at this problem, remove the lid off the toilet tank and observe the area where the handle enters the tank. Should the chain have become disconnected from the end of the handle, simply reconnect it to correct the problem. If the chain remains connected but the toilet still refuses to flush when you push the handle, try to shorten the chain instead. Perhaps the chain has simply gotten tangled or twisted, and is easy to repair by hand.
Plunger or Snake!
If the toilet refuses to flush because of a blockage, try using a plunger to clear it. If possible, align the cup end of the plunger over the hole in the bottom of the toilet, and actively lift the handle of the plunger up and down. This may be a dirty business! Should this not work, try inserting a plumbing snake down the pipe and unwind it down into the toilet to try and clear the clog. Think about a plumber in Perth, should you want the problem fully checked out and dealt with.
If a toilet keeps running or filling repeatedly, in the flapper assembly may be the culprit. Take a look inside the toilet tank and see if the flapper is lying flat over the hole running into the toilet bowl. If not, try wiping the base of the flapper to remove any build-up of minerals from the water. If the flapper appears cracked or broken, replace it with a new one to stop leaks. If the flapper is not the problem, check the float ball in the tank and make sure it isn’t rubbing against the tank walls. If you need the job simply fixed at an affordable price by professionals with the experience in everything plumbing, simply check out plumbdog.com.au.
Seat and Cover
If you have a cracked seat or seat cover, remove the rear bolts at the back base of the seat and replace the damaged components. For any cracks in the bowl or tank itself, then the whole toilet must be replaced. Keep that throne in good condition!
